Solaris 資料一覧

Solaris 8インストール

2007/5/24更新

CD-ROMでブート

ok boot cdrom

→ インストーラが自動的に起動する。

使用言語選択

インストール時に使用する言語を選択する。

ここで選択する言語はあくまでインストール時に(メッセージ表示用に)のみ使用される言語なので、実際にインストールする言語セットとは関係ない。

インストールに使用する端末によっては日本語がうまく処理できない場合もあるので、作業は英語で行うことにする。

The Solaris Installer can be run in English, or any of the following
languages:

 1) English                            6) Japanese
 2) German                             7) Korean
 3) Spanish                            8) Swedish
 4) French                             9) Simplified_Chinese
 5) Italian                           10) Traditional_Chinese

Select the language you want to use to run the installer: ■ ← 1

初期インストールかアップグレードインストールかの選択

ここでは初期インストールを行うことにする。

Do you want to do a Initial Install or Upgrade?

1) Initial Install
2) Upgrade
Please Enter 1 or 2 > ■ ← 1

rootディスクのレイアウト

新規インストールの場合はrootディスクをフォーマットしておいたほうが無難である。

The default root disk is /dev/dsk/c0t0d0.
The Solaris installer needs to format
/dev/dsk/c0t0d0 to install Solaris.

Do you want to format /dev/dsk/c0t0d0?  [y,n,?,q] ■ ← y

スワップのサイズをMB単位で指定する。

Enter a swap slice size between 382MB and 8632MB, default = 512MB [?] ■

スワップ用スライスをディスクの先頭から作成するかどうかを選択する。ルートファイルシステム用のスライスをディスクの先頭にするような場合はnを選択する。

Can the swap slice start at the beginning of the disk  [y,n,?,q] ■

上記質問にnと答えた場合、開始シリンダの入力を求められるので適切なシリンダを指定する。

Enter a starting cylinder between 0 and XXXX, default = 0 [?] ■

ここまでの設定を再確認する。

You have selected the following to be used by the Solaris installer:

    Disk Slice  : /dev/dsk/c0t0d0
    Size        : XXXX MB
    Start Cyl.  : 0

Is this OK  [y,n,?,q] ■ ← この指定でよければy

ここでminirootのインストールが始まり、終了するとリブートがかかる。

リブート後は自動的にWeb Startインストーラが起動するので対話形式でインストールを進めていく。

Web Startによるインストール開始

まず最初にインストールのステップが表示されるのでリターンを押して作業を進める。

  Network
  Name Service
  Date and Time
  Root Password
  Power Management

<Press Return to continue> ■ ← リターン

ネットワーク設定

ホストがネットワークに接続されているかどうかを選択する。

Is this machine networked (y/n) [n]? ■ ← ここではyを選択する

ネットワーク設定にDHCPを使用するかどうかを選択する。

Would you like to configure using DHCP [n]? ■ ← ここではnを選択する

ホストの属性を入力する。

Enter host name []: ■ ← ホスト名

Enter this machine's IP Address []: ■ ← IP アドレス

Enter the subnet netmask [255.255.255.0]: ■ ← サブネットマスク

Enable IPv6 [n]: ■ ← IPv6を使用する場合はy。ここではnを選択する

使用するネームサービスを選択する。

Available name services:

1. NIS+
2. NIS
3. DNS
4. LDAP
5. None

Please enter the number corresponding to the type of name service you would like [5]: ■ ← ここでは5を選択する

デフォルトルートを自動で設定するか手動で設定するかを選択する。

The default route provides a bridge between two physical networks that
forwards traffic between the networks.

You can let the software try to find one or you can specify one. The software
can find a default route only if the system is on a network that has a router
that broadcasts itself.

1. Find one
2. Specify one

Please enter the number corresponding to your router discovery method [1]: ■ ← ここでは2(手動)を選択する

デフォルトルートを設定する。

On this screen you must enter the IP Address of the default route.
IP Addresses must contain four sets of numbers separated by periods.

Router Address []: ■ ← デフォルトルート(XXX.XXX.XXX.XXX)を設定

タイムゾーン設定

タイムゾーンを選択する。日本を含む特定の地域を選択する場合は1を選択する。

Specify Time Zone by:

1. Geographic region
2. Offset from GMT
3. Time zone file

Please enter the number corresponding to how you would like to specify the
time zone [1]: ■ ← 1

リージョンを選択する。日本の場合は2。

Available Regions:

1. Africa
2. Asia, Eastern
3. Asia, Western
:

Please enter the number corresponding to the correct region [1]: ■ ← 2

ゾーンを選択する。日本の場合は4。

Available Zones:

1. People's Republic of China
2. Taiwan
3. Hong Kong
4. Japan
5. Republic of Korea
6. Singapore

Please enter the number corresponding to the correct zone [1]: ■ ← 4

デフォルトの日時が表示されるのでこれでよければy、違っていればnを選択して正しい時刻を入力する。

The default date and time is Monday October 20 13:14:31 JST 2003.
Do you want to use this date and time (y/n) [y]? ■

rootパスワード設定

Enter the root password []: ■ ← rootのパスワード
Enter the root password again []: ■ ← rootのパスワード(再入力)

インストールパラメータ確認

You have entered the following values:

  Host Name:                <ホスト名>
  IP Address:               <IPアドレス>
  System part of a subnet:  Yes
  Netmask:                  <ネットマスク>  
  Enable IPv6:              No
  Name Service:             None
  Default Route:            Yes
  Router Address:           <デフォルトルート> 
  Time Zone:                Japan
  
Enter 'y' to apply these values and proceed to the next stage of the
installation, or 'n' to return to the beginning and make changes (y/n): ■ 
← この設定でよければy、修正したければnを選択して再度目的の設定を行う。

付属ソフトウェアインストール

Solaris Web Start will assist you in installing software for Solaris.
    
  <Press ENTER to continue> ■ ← リターン

インストールメディアを選択する。

Please specify the media from which you will install the Solaris Operating
Environment.

Media:
  
1. CD  
2. Network File System 
3. HTTP (Flash archive only)
4. Local Tape (Flash archive only)
  
Media [1]: ■ ← ここでは1を選択する

Please insert the first CD from which you will install the Solaris Operating
Environment.
To select a different media, enter B to go Back.

  [] ■ ← 「SOLARIS 8 SOFTWARE 1 OF 2」のCDをCD-ROMに挿入してリターン

インストール種別を選択する。

Types of install available:

  1. Default Install
  2. Custom Install

Select the number corresponding to the type of install you would like [1]: ■
← デフォルトインストールかカスタムインストールかを選択するが、デフォルトを
   選択するとローカライズの設定もデフォルト(北米)になってしまうので2を選択する。

ローカライズの設定を行う。

  [ ]  0   Northern Africa
   :
  [ ]  11  Asia

To edit a region selection, enter the number here.
Enter n when finished. [n] ■ ← 地域コードを選択。日本の場合は11。

  [ ]  11     Asia
  [ ]  11.0   Japanese ( ja )
  [ ]  11.1   Japanese (Japan,PCK) ( ja_JP.PCK )
  [ ]  11.2   Japanese (Japan,UTF-8) ( ja_JP.UTF-8 )
  [ ]  11.3   Korean ( ko )
  [ ]  11.4   Korean (UTF-8) ( ko.UTF-8 )
  [ ]  11.5   Thai (Thailand) ( th_TH )
  [ ]  11.6   Chinese ( zh )
  [ ]  11.7   Chinese (GBK) ( zh.GBK )
  [ ]  11.8   Chinese (UTF-8) ( zh.UTF-8 )
  [ ]  11.9   Chinese (Taiwan) ( zh_TW )
  [ ]  11.10  Chinese (Taiwan,BIG5) ( zh_TW.BIG5 )
  [ ]  11.11  Chinese (Taiwan,UTF-8) ( zh_TW.UTF-8 )

To toggle locales in Asia, enter the number here.
Enter n when finished. [n] ■ 
← インストールするロケールを選択する(複数選択可能)。
   日本の場合は11.0、11.1、11.2を選択する。

上記を全て選択すると以下のような表示になる。

  [-]  11     Asia
  [X]  11.0   Japanese ( ja )
  [X]  11.1   Japanese (Japan,PCK) ( ja_JP.PCK )
  [X]  11.2   Japanese (Japan,UTF-8) ( ja_JP.UTF-8 )
  [ ]  11.3   Korean ( ko )
  [ ]  11.4   Korean (UTF-8) ( ko.UTF-8 )
   :

To toggle locales in Asia, enter the number here.
Enter n when finished. [n] ■ ← nを入力して一つ前のメニューに戻る

  [ ]  0   Northern Africa
   :
  [-]  6   North America
   :
  [-]  11  Asia

To edit a region selection, enter the number here.
Enter n when finished. [n] ■ ← nを入力して一つ前のメニューに戻る

デフォルトロケールの変更を行う。

Available regions:

  0     North America
  1     Asia
  2     POSIX

Default locale to be used:
English (United States,ISO8859-1) ( en_US.ISO8859-1 ).

If you wish to change the locale to be used, enter the number next
to the desired region to choose the locale to be used after the system
has been installed or enter n to use the default.  [n] ■ ← 日本の場合は1

Available locales for Asia:

  2.   Japanese ( ja )
  3.   Japanese (Japan,PCK) ( ja_JP.PCK )
  4.   Japanese (Japan,UTF-8) ( ja_JP.UTF-8 )
Please enter the number next to the desired locale to be used after the
system has been installed, or enter n to choose a new region.  [n] ■
← デフォルトで使用する言語パックを選択

ここからはインストールしたい対象物を選択していく。

各サイトによって必要なものは異なるので手順は省略する。

追加ソフトウェアインストール

標準でインストールされるソフトウェア以外に追加でインストールしたいソフトウェアがあればここで選択する。

例えばDiskSuite(下記メニューの2)などは標準ではインストールされないので必要に応じてインストール指示をする。

Select the CDs and products you would like to install.

 [X]  0  Solaris 8 Documentation European   204.4 MB
 [X]  1  Solaris 8 Documentation Asian   122.7 MB
 [ ]  2  Solaris 8 Software 2 of 2   0.0 MB
 [-]  3  Multilingual Computer Systems Supplement CD   246.0 MB

Select which CD(s) to install with the system. You will then be able to choose
individual products on each CD.

さらに、Solaris標準添付のもの以外に追加インストールしたいソフトウェアがあればここでインストールする。

各サイトによって必要なものは異なるので手順は省略する。

Additional Products

To scan for additional products, select the location you wish to scan.
Products found at the selected location that are in a Web Start Ready install
form will be added to the Products list.

  1. None
  2. Product CD
  3. Kiosk Download
  4. Local or Network File System

Web Start Ready product scan location [1]:

64bitサポート有無選択

従来の32bitモードに加えて64bitモードをサポートするかどうか選択する。

Do you want 64-bit support?  64-bit support is required in order to use this
product in 64-bit architecture environments.

  1. Software will be installed with 64-bit and 32-bit support (Recommended).
  2. Software will be installed with 32-bit support only.

Enter the number corresponding to your choice  [1] ■
← (32bitモードに加えて)64bitモードをサポートする場合は1。

ソフトウェアグループ選択

サイトの目的に応じてソフトウェアグループが以下のように分類されているので、必要なソフトウェアグループを選択する。

Available Solaris Software groups:

1. Entire Group Plus OEM
2. Entire Group
3. Developer Group
4. End User Group
5. Core Group

  Select the number corresponding to the desired Solaris software group [2]: ■